Skip to content
Free Shipping! on all orders to the lower 48 states

Ladder Racks

Drop Down Ladder Rack for Enclosed Service Bodies and KUV | Stow 2 Ladders

  • Made in Italy
  • Hydraulically Assisted
  • Financing Available

$2,499.00 $2,623.00

Single or Double Harrier Configuration?The Harrier is 26" wide and the universal drill-through mounting feet install to the flat roof of any cargo vehicle.
Ladder Locking Device?Ladder Locking Device for G2000 HARRIER – height 14.2 inches – ladder thickness up to 9.1 inches
Roof Height?
What is the length of the mounting area and the total height from the ground to the roof?
1

Choose a roof height to add to cart.

Backed by TNT Auto AccessoriesThousands of happy TNTvans customers

Some products, including The Harrier drop down ladder racks, are shipped directly from the manufacturer's warehouse (for example, Dayton, Ohio) to you. Delivery times shown on each product page apply. Products made by TNT ship from Saint George, Utah.

Award WinningThe Harrier ladder rack, manufactured by Gentili, was selected best contractor equipment product in 'Design for work' at the ADI Design Index in 2015.

Crash TestedThe Harrier ladder rack, manufactured by Gentili, is TÜV GS certified and crash tested.

Harrier G2000 Drop Down Ladder Rack for Enclosed Service Bodies and Knapheide KUV: Carry 2 Ladders and Lower Them to the Ground

Mounting: Drill-through installation goes directly on the roof. A single Harrier handles up to 2 ladders, and two units give you room for 4. It ships without a roof rack, but it will fit onto one you already have. Questions about fit? Message us.

Crews rely on enclosed service bodies and KUVs (Knapheide Utility Vehicles) to keep valuable tools dry, organized, and locked, essentially a workshop on wheels that protects cargo from theft and weather. Popular makers include Knapheide KUV, Reading Truck, BrandFX, Stahl, and Dakota Bodies. These bodies can stand over 10 feet tall, so ladders only belong on top if the rack can lower them down to the person on the ground.

The Harrier for commercial enclosed service bodies is a hydraulically assisted system that delivers safe, ergonomic ladder access at ground level from the back of your box truck or fleet unit.

At 2 feet wide, the Harrier leaves room for 3 across when the roof of your enclosed body is wide enough, holding 6 ladders.

Enclosed Service Body and KUV Mounting

Universal Through-Bolt Installation

Most professional enclosed service bodies can take the Harrier through a universal bolt-through mount.

Lay the six mounting feet across the flat roof and bolt the rack in place. It holds firmly yet stays removable, so you can shift it to a different vehicle down the road.

F.A.Q.

Where on a KUV or enclosed service body does the Harrier mount?

It goes on the flat roof, where its six mounting feet are positioned and then bolted through. That gives a stable base on the body, and it also works with a roof rack you already have.

Will extension and step ladders both work on an enclosed service body Harrier?

The Harrier takes extension ladders as long as 40 feet and step ladders too.

You can choose to install two Harriers on one roof to transport 4 ladders.

Made for contractors, electricians, plumbers, and service professionals, The Harrier rear ladder rack transforms your vehicle into a more efficient and body-friendly work vehicle.

When it’s time to replace your vehicle, the rack can be easily removed and transferred to your next vehicle, protecting your investment and maximizing long-term value.

Loading two extension ladders - Secure your ladders onto two hoop retainers.

drop down ladder rack diagram for ladder fitment

Ladder Fitment

Measure Your Ladders Before Ordering

The Harrier can secure one or more ladders stacked and secured in place with provided straps that come with each unit. The two ladder retainers are 9.25" tall.

contractor loading drop down ladder rack on back of white cargo work van

Ergonomic Ladder Loading Designed for Daily Commercial Use

Stop Lifting Overhead

With The Harrier, you simply stand your ladder upright and lean it into the rack.
There’s no need to lift ladders above shoulder height.

  • Lower shoulder strain and fatigue
  • Reduce risk of back injury
  • Improve jobsite efficiency
  • Decrease lost time due to work injuries
drop down ladder rack system with orange straps on a white background

Hydraulically Assisted Rear Slide and Drop System

Smooth, Controlled Movement in Under 30 Seconds

The Harrier uses heavy-duty gas struts to assist both lowering and raising your ladders.

  • Hydraulically assisted lift and drop
  • Full lowering cycle in under 30 seconds
  • Sliding rear chassis locks securely in transport position
white commercial fleet reading service body work truck with drop down ladder rack

Built for Professional Vehicles

Installation and Construction

  • Chassis arrives fully assembled
  • Weighs 80 lbs.
  • 6 Universal mounting feet
  • Manufactured in Italy by Gentili, a global leader in professional van equipment

Ladder Compatibility

  • Holds up to two ladders
  • Extension ladders up to 40 feet.
  • Compatible with most ladders
  • Weight capacity: 132 lbs

See How It Works

With Optional Locking Device

What’s Included With Your Harrier Ladder Rack

  • The Harrier Drop Down Ladder Rack
  • Ladder Straps
  • Universal Drill-Through Mounting
  • Harrier Operating Pole

This is a complete roof ladder rack system — not a partial kit.

Shipping

Orders are processed within 48 hours and ships from Dayton, OH within 6–8 business days.

The freight arrives by LTL on a long pallet and needs to be signed for when the package arrives.

Ordering note: Please enter your vehicle's length, width, and height so we send you the correct fitment. If your roof is over 110 inches, there will be a $400 upcharge for a larger rack and delivery.

Warranty Coverage

The Harrier Drop Down Ladder Rack includes a 3-year manufacturer warranty covering product defects.

Installation Time

Typical installation time is approximately 4 hours.

More Information:

Conduit Carrier

Frequently Asked Questions

How many ladders can the Harrier carry?

The rack is designed to safely carry two ladders with a combined weight of up to 132 lbs.

Does the ladder actually reach the ground?

Yes. Unlike side-pivot racks, The Harrier lowers to ground level, allowing vertical loading without overhead lifting.

Is the drop down ladder rack difficult to operate?

No. The hydraulic strut system assists the movement, and the full lowering cycle takes less than 30 seconds.

Will this rack fit both extension and step ladders?

Yes. The Harrier Ladder Rack is versatile, accommodating extension ladders (up to 40ft.) and step ladders.

Is professional installation required?

While professional installation is recommended, The Harrier is designed for a simple DIY installation.

Are drop-down ladder racks worth the extra cost?

Yes, for daily users, they significantly reduce back/shoulder injuries, improve efficiency, and make high-roof loading much safer.

Do they work in all weather conditions?

Yes, The Harrier Drop Down Ladder Rack is engineered with all aluminum and stainless steel components.

Is there a drop down ladder rack for enclosed cargo trailers, step vans, trucks, or service bodies?

Yes, The Harrier Drop Down Ladder Rack is the only drop down ladder rack that can be mounted to enclosed trailers, step vans, truck racks, and service bodies. The Harrier has 6 universal mounting feet that can attach to any flat surface.

Video Library

Also available for