Ladder Fitment
Measure Your Ladders Before Ordering
The Harrier can secure one or more ladders stacked and secured in place with provided straps that come with each unit. The two ladder retainers are 9.25" tall.
Job site or campsite, start your setup here.
Ladder Racks
$2,499.00 $2,623.00
Selection will add to the price
Choose a roof height to add to cart.
Some products, including The Harrier drop down ladder racks, are shipped directly from the manufacturer's warehouse (for example, Dayton, Ohio) to you. Delivery times shown on each product page apply. Products made by TNT ship from Saint George, Utah.
Award WinningThe Harrier ladder rack, manufactured by Gentili, was selected best contractor equipment product in 'Design for work' at the ADI Design Index in 2015.
Crash TestedThe Harrier ladder rack, manufactured by Gentili, is TÜV GS certified and crash tested.
Mounting: The Harrier bolts straight through the roof of the trailer and holds up to 2 ladders per unit; order two units to carry 4. A roof rack is not included, though the Harrier can be mounted on one you already have. Reach out to us with any fitment questions.
Tradespeople pull enclosed cargo trailers to jobsites to keep costly tools locked away from thieves and out of the weather. The trailer becomes a portable workshop, so gear stays put instead of being loaded and unloaded every day. More crews are adopting them, but the height of an enclosed trailer puts a regular fixed ladder rack out of reach. That makes a drop down design necessary, and the Harrier is the only ladder rack compatible with cargo trailers.
Our Harrier for enclosed cargo trailers is a hydraulically assisted lowering system that brings ladders down to ground level from the back of the trailer, so retrieving and stowing them is safe and easy on the body.
Each Harrier measures 2 feet across. A trailer roof with enough room can take 3 of them, which means 6 ladders on one trailer.
A universal bolt-through system lets the Harrier go onto the majority of enclosed cargo trailers.
Set the six mounting feet on the trailer's flat roof and bolt the rack down for a rigid installation. Because it bolts on, you can unbolt it later and reuse it on a different trailer or a commercial fleet vehicle.
Position the six mounting feet on the flat trailer roof and bolt through. The system is universal, so most enclosed trailers can take it, and it can be removed and fitted to another trailer later.
The rack itself is 80 lbs, and it has a 132 lb load capacity for ladders. Use that figure when choosing which ladders ride on your trailer.
You can choose to install two Harriers on one roof to transport 4 ladders.
Made for contractors, electricians, plumbers, and service professionals, The Harrier rear ladder rack transforms your vehicle into a more efficient and body-friendly work vehicle.
When it’s time to replace your vehicle, the rack can be easily removed and transferred to your next vehicle, protecting your investment and maximizing long-term value.
The Harrier can secure one or more ladders stacked and secured in place with provided straps that come with each unit. The two ladder retainers are 9.25" tall.
With The Harrier, you simply stand your ladder upright and lean it into the rack.
There’s no need to lift ladders above shoulder height.
The Harrier uses heavy-duty gas struts to assist both lowering and raising your ladders.
This is a complete roof ladder rack system — not a partial kit.
Orders are processed within 48 hours and ships from Dayton, OH within 6–8 business days.
The freight arrives by LTL on a long pallet and needs to be signed for when the package arrives.
Ordering note: Please enter your vehicle's length, width, and height so we send you the correct fitment. If your roof is over 110 inches, there will be a $400 upcharge for a larger rack and delivery.
The Harrier Drop Down Ladder Rack includes a 3-year manufacturer warranty covering product defects.
Typical installation time is approximately 4 hours.
The rack is designed to safely carry two ladders with a combined weight of up to 132 lbs.
Yes. Unlike side-pivot racks, The Harrier lowers to ground level, allowing vertical loading without overhead lifting.
No. The hydraulic strut system assists the movement, and the full lowering cycle takes less than 30 seconds.
Yes. The Harrier Ladder Rack is versatile, accommodating extension ladders (up to 40ft.) and step ladders.
While professional installation is recommended, The Harrier is designed for a simple DIY installation.
Yes, for daily users, they significantly reduce back/shoulder injuries, improve efficiency, and make high-roof loading much safer.
Yes, The Harrier Drop Down Ladder Rack is engineered with all aluminum and stainless steel components.
Yes, The Harrier Drop Down Ladder Rack is the only drop down ladder rack that can be mounted to enclosed trailers, step vans, truck racks, and service bodies. The Harrier has 6 universal mounting feet that can attach to any flat surface.
Thanks! You're on the list.