Ladder Fitment
The Harrier can secure one or more ladders stacked and secured in place with provided straps that come with each unit. The two ladder retainers are 9.25" tall. Measure your ladders before ordering.
Job site or campsite, start your setup here.
Ladder Racks
$2,499.00 $2,623.00
Selection will add to the price
Some products, including The Harrier drop down ladder racks, are shipped directly from the manufacturer's warehouse (for example, Dayton, Ohio) to you. Delivery times shown on each product page apply. Products made by TNT ship from Saint George, Utah.
Award WinningThe Harrier ladder rack, manufactured by Gentili, was selected best contractor equipment product in 'Design for work' at the ADI Design Index in 2015.
Crash TestedThe Harrier ladder rack, manufactured by Gentili, is TÜV GS certified and crash tested.
Ford's Econoline E-Series is a classic cargo van that carries the Harrier by way of its rain gutters, which avoids any drilling. The roof is about 70 inches wide, lengths range from 118 to 138 inches depending on wheelbase, and stock height is 85 inches.
If handling ladders is a daily routine, your rack should save your body some wear and tear. Press play to see how it behaves: Video: Harrier drop down ladder rack at work
The Harrier for the Econoline E-Series is a hydraulic, industrial-grade ladder lowering rack meant for work vans. Two ladders ride on it, and it slides off the back to ground level so you can load them without climbing.
The E-Series mounting kit grips the van's rain gutters, which means a strong connection and an unmarked roof.
Not every photo here shows an Econoline. The Harrier is the same rack on any vehicle, with a different kit for each van.
The kit grabs the rain gutters along the sides of the roof, then supports the Harrier on the rack that comes with it. That holds everything in place without drilling, and we supply it for every E-Series year.
Both fit. The Harrier handles extension ladders up to 40 feet as well as step ladders, so you can load whichever you need that day.
You can choose to install two Harriers on one roof to transport 4 ladders.
Made for contractors, electricians, plumbers, and service professionals, The Harrier rear ladder rack transforms your vehicle into a more efficient and body-friendly work vehicle.
When it’s time to replace your vehicle, the rack can be easily removed and transferred to your next vehicle, protecting your investment and maximizing long-term value.
The Harrier can secure one or more ladders stacked and secured in place with provided straps that come with each unit. The two ladder retainers are 9.25" tall. Measure your ladders before ordering.
The Harrier not only comes with a Drop Down Ladder Rack rear sliding chassis, it also comes with a van roof rack with three 68" cross bars. By placing The Harrier on one side of the roof rack, you can utilize the other side with more ladders or materials.
With The Harrier, you simply stand your ladder upright and lean it into the rack.
There’s no need to lift ladders above shoulder height.
The Harrier uses heavy-duty gas struts to assist both lowering and raising your ladders.
Traditional Drop Down Ladder Racks
The Harrier Rear Drop Ladder Rack
Because The Harrier can install on vans without drilling holes, it can be removed and transferred to another compatible van when your lease ends.
That makes it a long-term tool investment instead of a one-vehicle expense.
This is a complete roof ladder rack system — not a partial kit.
Orders are processed within 48 hours and ships from Dayton, OH within 6–8 business days.
The freight arrives by LTL on a long pallet and needs to be signed for when the package arrives.
Ordering note: Please enter your van's year, make, model, wheelbase, and roof height so we send you the correct installation hardware made for your specific van.
The Harrier Drop Down Ladder Rack includes a 3-year manufacturer warranty covering product defects.
Typical installation time is approximately 4 hours.
Yes. We provide van specific mounting kits compatible with most models.
Yes. Because installation requires no drilling, the system can be removed and installed on another compatible vehicle.
The rack is designed to safely carry two ladders with a combined weight of up to 132 lbs.
The Harrier weighs 80 lbs.
Yes. Unlike side-pivot racks, The Harrier lowers to ground level, allowing vertical loading without overhead lifting.
No. The hydraulic strut system assists the movement, and the full lowering cycle takes less than 30 seconds.
Yes. The Harrier Ladder Rack is versatile, accommodating extension ladders (up to 40ft.) and step ladders.
While professional installation is recommended, The Harrier is designed for a simple DIY installation.
Yes, for daily users, they significantly reduce back/shoulder injuries, improve efficiency, and make high-roof loading much safer.
Yes, The Harrier Drop Down Ladder Rack is engineered with all aluminum and stainless steel components.
Yes, The Harrier Drop Down Ladder Rack is the only drop down ladder rack that can be mounted to enclosed trailers, step vans, truck racks, and service bodies. The Harrier has 6 universal mounting feet that can attach to any flat surface.
Thanks! You're on the list.