Skip to content
Free Shipping! on all orders to the lower 48 states

Ladder Racks

Mercedes Metris | Drop Down Ladder Rack for 2 Ladders | The Harrier

  • Made in Italy
  • Hydraulically Assisted
  • Financing Available

$2,499.00 $2,623.00

Single or Double Harrier Configuration?The roof track that comes with The Harrier can hold two Harriers for a double configuration to carry up to 4 ladders.
Ladder Locking Device?Ladder Locking Device for G2000 HARRIER – height 14.2 inches – ladder thickness up to 9.1 inches
Conduit Carrier?
1
Backed by TNT Auto AccessoriesThousands of happy TNTvans customers

Some products, including The Harrier drop down ladder racks, are shipped directly from the manufacturer's warehouse (for example, Dayton, Ohio) to you. Delivery times shown on each product page apply. Products made by TNT ship from Saint George, Utah.

Award WinningThe Harrier ladder rack, manufactured by Gentili, was selected best contractor equipment product in 'Design for work' at the ADI Design Index in 2015.

Crash TestedThe Harrier ladder rack, manufactured by Gentili, is TÜV GS certified and crash tested.

Mercedes Metris Drop Down Ladder Rack: Harrier G2000 Holds 2 Ladders Up Top and Delivers Them Where You Need Them

A Rear-Sliding Ladder Rack That Settles at Ground Level

The Mercedes-Benz Metris is a mid-size cargo van about 75 inches tall, and it accepts a roof ladder rack through factory-fixed mounting points. The Harrier is designed for both the 126-inch and the 135-inch wheelbase.

Handling ladders every day is tough on your back, shoulders, and patience. Watch how the Harrier takes care of it: Video: how the Harrier rack lowers

Built for work vans, the Harrier for the Metris is a hydraulic ladder lowering rack made for professional use. It carries 2 ladders and slides rearward off the roof before dropping to the ground, so loading stays safe and low-strain.

Metris Fitment

Installs Without Drilling Using the Metris Mounting Points

A Metris kit connects to the fixed points Mercedes built into the roof, producing a secure, neat installation with no drilling.

Some of the photos feature other vehicles. The Harrier remains the same product on each one, and only the roof mounting kit differs.

F.A.Q.

Does the Harrier mount to both Metris wheelbases?

It does. The Harrier is designed for the 126-inch and 135-inch Metris, and it attaches to the factory-fixed points on the roof with the Metris kit instead of drilling.

What is the weight limit for ladders on a Metris Harrier?

A Harrier is rated for 132 lbs of ladders, and the unit alone weighs 80 lbs. Add up your ladders before loading and stay under that rating.

You can choose to install two Harriers on one roof to transport 4 ladders.

Made for contractors, electricians, plumbers, and service professionals, The Harrier rear ladder rack transforms your vehicle into a more efficient and body-friendly work vehicle.

When it’s time to replace your vehicle, the rack can be easily removed and transferred to your next vehicle, protecting your investment and maximizing long-term value.

Loading two extension ladders - Secure your ladders onto two hoop retainers.

drop down ladder rack diagram for ladder fitment

Ladder Fitment

The Harrier can secure one or more ladders stacked and secured in place with provided straps that come with each unit. The two ladder retainers are 9.25" tall. Measure your ladders before ordering.

drop down ladder rack diagram mounting on commercial work van

Extra Storage Space On Van Roof Rack

The Harrier not only comes with a Drop Down Ladder Rack rear sliding chassis, it also comes with a van roof rack with three 68" cross bars. By placing The Harrier on one side of the roof rack, you can utilize the other side with more ladders or materials.

contractor loading drop down ladder rack on back of white cargo work van

Ergonomic Ladder Loading Designed for Daily Commercial Use

Stop Lifting Overhead

With The Harrier, you simply stand your ladder upright and lean it into the rack.
There’s no need to lift ladders above shoulder height.

  • Lower shoulder strain and fatigue
  • Reduce risk of back injury
  • Improve jobsite efficiency
  • Decrease lost time due to work injuries
drop down ladder rack system with orange straps on a white background

Hydraulically Assisted Rear Slide and Drop System

Smooth, Controlled Movement in Under 30 Seconds

The Harrier uses heavy-duty gas struts to assist both lowering and raising your ladders.

  • Hydraulically assisted lift and drop
  • Full lowering cycle in under 30 seconds
  • Sliding rear chassis locks securely in transport position
Two images showing a person loading a ladder onto a commercial van incorrectly from the side and correctly from the rear, with a 'Safe Product' label.

Why Contractors Choose the Harrier Over Traditional Ladder Racks

Side-Drop Ladder Rack vs The Harrier

Traditional Drop Down Ladder Racks

  • Pivot over the side of the van
  • Ladder still sits above your head
  • Requires overhead lifting
  • Strains shoulders and back

The Harrier Rear Drop Ladder Rack

  • Slides off the rear of the van
  • Drops to ground level
  • No overhead lifting required
  • Designed for ergonomic vertical loading
white work commercial sprinter fleet contractor van with drop down ladder rack holding 2 ladders

Built for Professional Vans

Installation and Construction

  • Chassis arrives fully assembled
  • Weighs 80 lbs.
  • No-Drill design specifically for your van
  • Manufactured in Italy by Gentili, a global leader in professional van equipment

Ladder Compatibility

  • Holds up to two ladders
  • Secure 4 ladders with 2 Harriers on one roof.
  • Extension ladders up to 40 feet.
  • Compatible with most ladders
  • Weight capacity: 132 lbs

See How It Works:

With Optional Locking Device:

fleet of commercial work trucks with drop down ladders racks for contractors

Perfect for Leased Vans or Fleet Vehicles

Because The Harrier can install on vans without drilling holes, it can be removed and transferred to another compatible van when your lease ends.

That makes it a long-term tool investment instead of a one-vehicle expense.

What’s Included:

  • The Harrier Drop Down Ladder Rack
  • Ladder straps
  • Van-specific roof rack
  • Harrier Operating Pole

This is a complete roof ladder rack system — not a partial kit.

Shipping:

Orders are processed within 48 hours and ships from Dayton, OH within 6–8 business days.

The freight arrives by LTL on a long pallet and needs to be signed for when the package arrives.

Ordering note: Please enter your van's year, make, model, wheelbase, and roof height so we send you the correct installation hardware made for your specific van.

Warranty Coverage:

The Harrier Drop Down Ladder Rack includes a 3-year manufacturer warranty covering product defects.

Installation Time

Typical installation time is approximately 4 hours.

More Information:

Conduit Carrier:

Frequently Asked Questions

Will this ladder rack fit my van?

Yes. We provide van specific mounting kits compatible with most models.

Can I transfer this ladder rack to another van later?

Yes. Because installation requires no drilling, the system can be removed and installed on another compatible vehicle.

How many ladders can The Harrier carry?

The rack is designed to safely carry two ladders with a combined weight of up to 132 lbs.

How much does The Harrier weigh?

The Harrier weighs 80 lbs.

Does the ladder actually reach the ground?

Yes. Unlike side-pivot racks, The Harrier lowers to ground level, allowing vertical loading without overhead lifting.

Is the system difficult to operate?

No. The hydraulic strut system assists the movement, and the full lowering cycle takes less than 30 seconds.

Will this rack fit both extension and step ladders?

Yes. The Harrier Ladder Rack is versatile, accommodating extension ladders (up to 40ft.) and step ladders.

Is professional installation required?

While professional installation is recommended, The Harrier is designed for a simple DIY installation.

Are drop-down ladder racks worth the extra cost?

Yes, for daily users, they significantly reduce back/shoulder injuries, improve efficiency, and make high-roof loading much safer.

Do they work in all weather conditions?

Yes, The Harrier Drop Down Ladder Rack is engineered with all aluminum and stainless steel components.

Is there a drop down ladder rack for enclosed cargo trailers, step vans, trucks, or service bodies?

Yes, The Harrier Drop Down Ladder Rack is the only drop down ladder rack that can be mounted to enclosed trailers, step vans, truck racks, and service bodies. The Harrier has 6 universal mounting feet that can attach to any flat surface.

Video Library

Also available for